Difference between revisions of "Interior"

From DestinationSSM
Jump to: navigation, search
Line 2: Line 2:
  
 
How much of this sort of thing are we allowed to remove?  Need to scrutinize rules...
 
How much of this sort of thing are we allowed to remove?  Need to scrutinize rules...
 +
 +
==Blower Box==
 +
 +
Need to find a non-A/C box and swap it into the dash.
 +
 +
==A/C==
 +
 +
Check for any other remnants of the A/C system that need removing.
 +
 +
==Airbag==
 +
 +
Check for and remove the airbag battery from under the dash.  Remove the sensors from both fenders and the front of the car, and as much wiring as possible.
 +
 +
==Belts==
 +
 +
Are belts worth doing?  Are they lighter than the stock belts?
 +
 +
Legality of harness bar?  I remember there being some language about it.  Something about definitely not serving any structural purpose.
  
 
==Seats==
 
==Seats==

Revision as of 20:33, 11 November 2011

Sound Deadening

How much of this sort of thing are we allowed to remove? Need to scrutinize rules...

Blower Box

Need to find a non-A/C box and swap it into the dash.

A/C

Check for any other remnants of the A/C system that need removing.

Airbag

Check for and remove the airbag battery from under the dash. Remove the sensors from both fenders and the front of the car, and as much wiring as possible.

Belts

Are belts worth doing? Are they lighter than the stock belts?

Legality of harness bar? I remember there being some language about it. Something about definitely not serving any structural purpose.

Seats

Need to find a nice comfy light main seat, and then a very light and uncomfortable passenger seat.

Gauges

Should probably pick up the same panel I used on the KLiata, and then put a 30psi vacuum/boost gauge, an oil pressure gauge, and a water temp gauge in it.

Fuel Cell

The rules allow replacing the fuel tank with a fuel cell. How much does the stock tank weigh, and how much would an equivalent allowed fuel cell weigh?

Steering Wheel

Car comes with some quick remove wheel. No idea what it is yet or if there's weight savings going to some other wheel... Need to see if the horn still works.

Windows

Currently has power windows. Need to find a set of manual windows to swap in. Hannah makes a good point that this may require also changing the inside door panel to get a hole for the levers. This in theory saves 4 lbs.