Difference between revisions of "Exterior"
(→Hood) |
|||
| Line 17: | Line 17: | ||
* CF/Glass: 750$, 11 pounds | * CF/Glass: 750$, 11 pounds | ||
* Full CF Honeycomb: 1950$, 4.5 pounds | * Full CF Honeycomb: 1950$, 4.5 pounds | ||
| + | |||
| + | ====Wiper System==== | ||
| + | |||
| + | We can pull the wiper nozzles from the hood, but we have to keep the rest of the system (16.1.I) so it's probably not worth bothering. | ||
===Rear Bumper=== | ===Rear Bumper=== | ||
Revision as of 12:00, 12 November 2011
Contents
Headlights
Stock headlights are quite heavy, and allowed to be replaced. Need to look up the specifics of the exact rule, but I know they can be replaced with something like Duncan's setup which is way lighter.
Fiberglass Parts
This guy makes a bunch of fiberglass replacement parts, outlined below (emailed)...
Front Bumper/Fenders
How much does the stock stuff weigh?
- Fiberglass/Kevlar: $1250, 20 pounds -- Has integrated fender flares, so don't need to deal with those breaking off all the time...
Hood
- Stock: 18.5 pounds? He claims 14# improvement with the CF hood, implying 18.5 stock.
- CF/Glass: 750$, 11 pounds
- Full CF Honeycomb: 1950$, 4.5 pounds
Wiper System
We can pull the wiper nozzles from the hood, but we have to keep the rest of the system (16.1.I) so it's probably not worth bothering.
Rear Bumper
- Fiberglass/Kevlar: 600$
Aerodynamics
Solo Rules
Wing + Canards is a maximum of 8 sq ft. Front splitter can extend no more than 6 inches in front of the car.
Front Splitter
Not sure what to do with this yet. APR sells pretty generic flat splitter pieces here. Still need to come up with a way to mount it to the car, and to make an airdam for it.
Canards
APR sells generic canards here.
Rear Wing
Don Nimi has a guy that is working on a new twin element wing to the limit of the SSM rules. It'll be about 2k$ and hopefully ready by early spring.
Ciro Designs makes a bunch of wing designs here, but the SSM wing is only 5.7 sq ft. They're also working on a new longer CF twin element design that will be to the limit of the rules. It'll be about 1k$. They're not sure when it will be available -- hopefully a couple months. Been emailing with Rick Jung (owner) about it.
Wheels/Tires
Drys
I have a set of 15x10 custom Spinwerks wheels, with brand new 275/35/15 Hoosier A6s on them. The wheels are 13.2-13.4 lbs each. The tires have a 23.0" diameter.
Wets
What should we do for wets? The W710 comes in sizes that pretty much screw us. The old Hoosier Wet comes in probably 225 at widest for us (unless we can fit the 245/45/16). The new Hoosier Wet H20 comes in pretty identical sizes to the old one. 245/40/17 probably won't fit under the fenders, but we can investigate.
